Helpline no. +91-98142-15000 / +1 (714) 690-0382                 Product of RUST-X Technology.
sprays

Protective Coat Spray

Protective Coat

Protective Coat Spray

Description

RUST-X PROTECTIVE COAT Spray leaves a resilient, heavy duty waxy film for long term corrosion protection of all types of components and equipment particularly those operating in outdoor environments. PROTECTIVE COAT Spray is chemically resistant and ideal for exposed metal components and machinery in storage both indoors and outdoors. PROTECTIVE COAT Spray is highly resistant to water wash-off and provides excellent corrosion protection for a wide variety of applications commonly found throughout the manufacturing industry in many different types of arduous environments.

Choose Other Product

Product Details

  • Product Description

    RUST-X PROTECTIVE COAT Spray leaves a resilient, heavy duty waxy film for long term corrosion protection of all types of components and equipment particularly those operating in outdoor environments. PROTECTIVE COAT Spray is chemically resistant and ideal for exposed metal components and machinery in storage both indoors and outdoors. PROTECTIVE COAT Spray is highly resistant to water wash-off and provides excellent corrosion protection for a wide variety of applications commonly found throughout the manufacturing industry in many different types of arduous environments.

    Uses

    • RUST-X PROTECTIVE COAT Spray is Airbus approved for main landing gear axle sleeves.
    • RUST-X PROTECTIVE COAT Spray is also ideal for applications such as: o Hinges o Gearbox casings o Other exposed metal components

  • Application Method


    • Use in well ventilated areas and ensure there are no sources of ignition.
    • Shake the aerosol well and continue shaking for 2 minutes after the agitator ball starts to rattle to ensure complete mixing before use.
    • Test spray the aerosol initially to ensure a smooth even coating is applied.
    • Apply a thin, even coating from a distance of 15- 30 cm (6-12 inches) in shortbursts to provide a complete and thorough coating for maximum protection.
    • The applied, thin film will be tack dry in approximately 1 minute after which a further thin coating can be applied if required.
    • Best practice - assemble components after a minimum of 5 mins for optimum performance.
    • The storage temperature should be kept below +40°C, and the storage area should be out of direct sunlight.
    • Shelf life is 4 years from date of manufacture.

    Direction of usage and storage

    • Shake can well before use
    • Spray from a distance of 15-30 cm
    • For best results apply thin even film
    • Use in well ventilated condition
    • Check on small area of the part before using
    • Replace the cap after use]

  • Features


    • Transparent coating
    • Highly abrasion & scratch resistant
    • Forms even coat
    • Provides excellent corrosion resistance
    • Can be used on metal, plastic & wood
    • Does not yellow over time
    • Can be used for vehicle underbodies
    • Does not cause staining of the surface
    • Does not affect paints
    • Can affect plating so should be duly trialed

  • Click here to Download MSDS.

    Go to W3Schools!

    RUST-X Sprays MSDS

  • Click here to Download Technical Datasheet.

    Go to W3Schools!

    RUST-X Sprays Technical Datasheet

  • Uploading Soon.....